FLYWHEEL PULLER M19x1.00 R/H Right Hand.

LEM, KTM, Italjet and PW50. Minarelli AM6 for Aprilia RS50,

• Used for removal of the flywheel or rotor.
• Premium quality high carbon steel S45C.
• Heat treated for strength and durability.
• Durable hot black oxide finish.
• 19mm x 1.0P RH External Thread.
• Bolt Head AF 18mm Lenght 58mm
• Body size 40mm long, Hole Dia. 13.5mm x 25mm deep.

Tips on use.
- Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in.
- Use copper grease on the puller threads, for long life.
- Make sure the puller is fully screwed into the flywheel.
- After tightening use a hammer on the centre and tap to jolt free [not always need].
- If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel.

Part No.00-099