Flywheel Puller 30mm x 1.5-RH-External Female 1 Inch Internal Depth.

Flywheel Puller 30mm x 1.5-RH-External Female 1 Inch Internal Depth.

Flywheel puller for most Suzuki GS1100/1150 (81-85), all

late model street singles, twins, and multi-cylinder models.
1981 Suzuki GS1100EX
1981 Suzuki GS1100SX
1981 Suzuki GS1150
1982 Suzuki GS1100EZ
1982 Suzuki GS1100GK2Z
1982 Suzuki GS1100GKZ
1982 Suzuki GS1100GLZ
1982 Suzuki GS1100GZ

• All pullers made to precise standards equal to factory original tools or better. Each tool and bolts are black oxide plated for rust protection.
• Tool hardness is softer than the motorcycle part to prevent damage to expensive crankshafts and flywheels. 5/8in. fine thread bolts used in all pullers.

Tips on use.
- Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in.
- Use copper grease on the puller threads, for long life.
- Make sure the puller is fully screwed into the flywheel.
- After tightening use a hammer on the centre and tap to jolt free [not always need].
- If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel.

Part No. 00-093 (oro2u.com)