RFX Pro Series Fork Bleeders are designed to release excess air from original cartridge and modern dual-chamber forks (not compatible with air forks). By maintaining proper air pressure, these bleeders ensure smooth fork operation, prevent a harder-than-normal feel, and reduce the risk of seal failure.

Product Features:

• Ensures proper fork operation.
• Quick installation.
• No tools required to operate once installed.
• CNC aerospace grade billet aluminium.
• Colour anodised for that factory look.
• RFX laser etched logo.
• Tested by top UK race teams.
• Quick and Easy
• Instant smooth suspension results 

Fitting Instructions:

• Ensure that the bike is on a bike stand with the front wheel raised above the ground.
• Clean around the original fork bleed screw so no dirt will enter once removed.
• Remove the original bleed screw using an appropriate screwdriver/Torx Key.
• Fit the new RFX Pro Series Bleeder ensuring that the o ring is over the threads.
• Thread on by hand until the o ring seals against the fork cap.
• Make sure the bleeder is clear form contact with all mounts and handlebars.
• Gently tighten using a 10mm spanner being careful not to strip the aluminium threads.
• Please Note: Do not over tighten

Instructions for use:

• Place Bike on a bike stand making sure the front wheel is raised above the ground.
• Clean around the fork bleeder.
• Press the bleeder to release air.